Assessment Of the Obturation Quality of Three Different Endodontic Rotary Files Using Cbct
Main Article Content
Keywords
C.B.C.T, Quality, Permanent teeth, Obturation
Abstract
Aim: To assess the quality of obturation using three different rotary endodontic files using CBCT
Materials And Methods: 30 extracted single rooted mandibular premolars were collected. Access cavity preparation was done and working length determined. Biomechanical preparation was done using three different rotary files. Samples were divided into 3 groups and the quality of obturation was analyzed using cone beam computed tomography.
Results: Profit S3 showed better obturation quality comparatively to other two file systems. Assessment of quality of obturation was statistically done using chi square test and there was a statistical significant difference between all the groups in length of obturation, quality of the obturation and density of the obturation (p=0.01).
Conclusion: Among three different rotary endodontic files profit S3 has perfect obturation quality in length, density and taper next comes the Neo Endo predominantly has acceptable quality of obturation compared to protaper Gold in density, taper and length.
References
1. Antony, S. Delphine Priscilla, Aravind Kumar Subramanian, M. S. Nivedhitha, and Pradeep Solete. 2020. “Comparative Evaluation of Canal Transportation, Centering Ability, and Dentin Removal between ProTaper Gold, One Curve, and Profit S3: An in Vitro Study.” Journal of Conservative Dentistry: JCD 23 (6): 632–36.
2. Bürklein, Sebastian, and Edgar Schäfer. 2012. “Apically Extruded Debris with Reciprocating Single-File and Full-Sequence Rotary Instrumentation Systems.” Journal of Endodontia 38 (6): 850–52.
3. Cakici, E. B., E. Yildirim, F. Cakici, and A. S. Erdogan. 2016. “Assessment of Periapical Health, Quality of Root Canal Filling, and Coronal Restoration by Using Cone‑beam Computed Tomography.” Nigerian Journal of Clinical Practice. https://www.ajol.info/index.php/njcp/article/view/142759.
4. Capar, Ismail Davut, Hüseyin Ertas, Evren Ok, and Hakan Arslan. 2014. “Comparison of Single Cone Obturation Performance of Different Novel Nickel-Titanium Rotary Systems.” Acta Odontologica Scandinavica 72 (7): 537–42.
5. Celikten, Berkan, Reinhilde Jacobs, Karla deFaria Vasconcelos, Yan Huang, Laura Ferreira Pinheiro Nicolielo, and Kaan Orhan. 2017. “Assessment of Volumetric Distortion Artifact in Filled Root Canals Using Different Cone-Beam Computed Tomographic Devices.” Journal of Endodontics 43 (9): 1517–21. 6. Chesler, Matthew B., Patricia A. Tordik, Glen M. Imamura, and Gary G. Goodell. 2013. “Intramanufacturer Diameter and Taper Variability of Rotary Instruments and Their Corresponding Gutta-Percha Cones.” Journal of Endodontia 39 (4): 538–41.
7. Gordon, M. P. J., R. M. Love, and N. P. Chandler. 2005. “An Evaluation of .06 Tapered Gutta-Percha Cones for Filling of .06 Taper Prepared Curved Root Canals.” International Endodontic Journal 38 (2): 87–96.
8. Haupt, Franziska, Miriam Seidel, Marta Rizk, Hans-Georg Sydow, Annette Wiegand, and Tina Rödig. 2018. “Diameter and Taper Variability of Single-File Instrumentation Systems and Their Corresponding Gutta-Percha Cones.” Journal of Endodontia 44 (9): 1436–41.
9. Krishna, R. Nivesh, R. Nivesh Krishna, and K. Yuvaraj Babu. 2016. “Estimation of Stature from Physiognomic Facial Length and Morphological Facial Length.” Research Journal of Pharmacy and Technology. https://doi.org/10.5958/0974-360x.2016.00423.6.
10. Marofi, Faroogh, Roza Motavalli, Vladimir A. Safonov, Lakshmi Thangavelu, Alexei Valerievich Yumashev, Markov Alexander, Navid Shomali, et al. 2021. “CAR T Cells in Solid Tumors: Challenges and Opportunities.” Stem Cell Research & Therapy 12 (1): 81.
11. Mirmohammadi, Hesam, Monika Sitarz, and Hagay Shemesh. 2018. “Intra-Manufacture Diameter Variability of Rotary Files and Their Corresponding Gutta-Percha Cones Using Laser Scan Micrometre.” Iranian Endodontic Journal 13 (2): 159–62.
12. Mohanavel, V., K. S. Ashraff Ali, S. Prasath, T. Sathish, and M. Ravichandran. 2020. “Microstructural and Tribological Characteristics of AA6351/Si3N4 Composites Manufactured by Stir Casting.” Journal of Materials Research and Technology 9 (6): 14662–72.
13. Mootha, Archana, Sankari Malaiappan, N. D. Jayakumar, Sheeja S. Varghese, and Julie Toby Thomas. 2016. “The Effect of Periodontitis on Expression of Interleukin-21: A Systematic Review.” International Journal of Inflammation 2016 (February): 3507503.
14. Nagaraja, Shruthi, and B. V. Sreenivasa Murthy. 2010. “CT Evaluation of Canal Preparation Using Rotary and Hand NI-TI Instruments: An in Vitro Study.” Journal of Conservative Dentistry: JCD 13 (1): 16–22.
15. Naseri, Mandana, Ali Kangarlou, Atefeh Khavid, and Mostafa Goodini. 2013. “Evaluation of the Quality of Four Root Canal Obturation Techniques Using Micro-Computed Tomography.” Iranian Endodontic Journal 8 (3): 89–93.
16. Nur, Bilge Gülsüm, Evren Ok, Mustafa Altunsoy, Osman Sami Ağlarci, Mehmet Çolak, and Enes
Güngör. 2014. “Evaluation of Technical Quality and Periapical Health of Root-Filled Teeth by Using Cone-Beam CT.” Journal of Applied Oral Science: Revista FOB 22 (6): 502–8.
17. Ozawa, Toshiko, Nessrin Taha, and Harold H. Messer. 2009. “A Comparison of Techniques for Obturating Oval-Shaped Root Canals.” Dental Materials Journal 28 (3): 290–94.
18. Pereira, Andréa Cardoso, Celso Kenji Nishiyama, and Lidiane de Castro Pinto. 2013. “Single-Cone Obturation Technique: A Literature Review.” RSBO 9 (4): 442–47.
19. Robert, R., C. Justin Raj, S. Krishnan, and S. Jerome Das. 2010. “Growth, Theoretical and Optical Studies on Potassium Dihydrogen Phosphate (KDP) Single Crystals by Modified Sankaranarayanan–Ramasamy (mSR) Method.” Physica. B, Condensed Matter 405 (1): 20–24.
20. Sathish, T., and S. Karthick. 2020. “Wear Behaviour Analysis on Aluminium Alloy 7050 with Reinforced SiC through Taguchi Approach.” Journal of Materials Research and Technology 9 (3): 3481–87.
21. Singla, Meenu G., Hemanshi Kumar, and Ritika Satija. 2021. “Shaping Ability of ProTaper Gold, One Curve, and Self-Adjusting File Systems in Severely Curved Canals: A Cone-Beam Computed Tomography Study.” Journal of Conservative Dentistry: JCD 24 (3): 271–77.
22. Song, D., L. Zhang, W. Zhou, and Q. Zheng. 2017. “Comparing Cone-Beam Computed Tomography with Periapical Radiography for Assessing Root Canal Obturation in Vivo Using Microsurgical Findings as Validation.” Dentomaxillofacial. https://www.birpublications.org/doi/abs/10.1259/dmfr.20160463.
23. Sriram, Nirisha, Thenmozhi, and Samrithi Yuvaraj. 2015. “Effects of Mobile Phone Radiation on Brain: A Questionnaire Based Study.” Journal of Advanced Pharmaceutical Technology & Research 8 (7): 867.
24. Subashri, A., and M. S. Thenmozhi. 2016. “Occipital Emissary Foramina in Human Adult Skull and Their Clinical Implications.” Research Journal of Pharmacy and Technology. https://doi.org/10.5958/0974-360x.2016.00135.9.
25. Suresh, P., K. Marimuthu, S. Ranganathan, and T. Rajmohan. 2014. “Optimization of Machining Parameters in Turning of Al-SiC-Gr Hybrid Metal Matrix Composites Using Grey-Fuzzy Algorithm.” Transactions of the Nonferrous Metals Society of China 24 (9): 2805–14.
26. Taşdemir, Tamer, Kürşat Er, Tahsin Yildirim, Kurtulus Buruk, Davut Celik, Sabri Cora, Erhan Tahan, Behram Tuncel, and Ahmet Serper. 2009. “Comparison of the Sealing Ability of Three Filling Techniques in Canals Shaped with Two Different Rotary Systems: A Bacterial Leakage Study.” Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontics 108 (3): e129–34.
27. Verma, Mudita, N. Meena, R. Anitha Kumari, Sudhanva Mallandur, R. Vikram, and Vishwas Gowda. 2017. “Comparison of Apical Debris Extrusion during Root Canal Preparation Using Instrumentation Techniques with Two Operating Principles: An in Vitro Study.” Journal of Conservative Dentistry: JCD 20 (2): 96–99.
28. Vigneshwaran, S., R. Sundarakannan, K. M. John, R. Deepak Joel Johnson, K. Arun Prasath, S. Ajith, V. Arumugaprabu, and M. Uthayakumar. 2020. “Recent Advancement in the Natural Fiber Polymer Composites: A Comprehensive Review.” Journal of Cleaner Production 277 (December): 124109.
29. Vyavahare, Nishant K., Srinidhi Surya Raghavendra, and Niranjan N. Desai. 2016. “Comparative Evaluation of Apically Extruded Debris with V-Taper, ProTaper Next, and the
Self-Adjusting File Systems.” Journal of Conservative Dentistry: JCD 19 (3): 235–38.
30. Yılmaz Çırakoglu, Neslihan, and Yağız Özbay. 2021. “Apically Extruded Debris Associated with ProTaper Next, ProTaper Gold and TruNatomy Systems: An in Vitro Study.” Journal of Dental Research, Dental Clinics, Dental Prospects 15 (1): 30–34.
31. Zand, Vahid, Amin Salem Milani, Pardis Tehranchi, Sabete Bagheri Sabzevar, and Omid Goudarzi. 2022. “Comparative CBCT Assessment of Obturation Quality in Different Obturation Techniques.” Journal of Dental Materials and Techniques 11 (2): 84–92.
32. Zhang, Pengfei, Keyong Yuan, Qiaoqiao Jin, Fen Zhao, and Zhengwei Huang. 2021. “Presence of Voids after Three Obturation Techniques in Band‐shaped Isthmuses: A Micro‐computed Tomography Study.” BMC Oral Health 21 (1): 227.
2. Bürklein, Sebastian, and Edgar Schäfer. 2012. “Apically Extruded Debris with Reciprocating Single-File and Full-Sequence Rotary Instrumentation Systems.” Journal of Endodontia 38 (6): 850–52.
3. Cakici, E. B., E. Yildirim, F. Cakici, and A. S. Erdogan. 2016. “Assessment of Periapical Health, Quality of Root Canal Filling, and Coronal Restoration by Using Cone‑beam Computed Tomography.” Nigerian Journal of Clinical Practice. https://www.ajol.info/index.php/njcp/article/view/142759.
4. Capar, Ismail Davut, Hüseyin Ertas, Evren Ok, and Hakan Arslan. 2014. “Comparison of Single Cone Obturation Performance of Different Novel Nickel-Titanium Rotary Systems.” Acta Odontologica Scandinavica 72 (7): 537–42.
5. Celikten, Berkan, Reinhilde Jacobs, Karla deFaria Vasconcelos, Yan Huang, Laura Ferreira Pinheiro Nicolielo, and Kaan Orhan. 2017. “Assessment of Volumetric Distortion Artifact in Filled Root Canals Using Different Cone-Beam Computed Tomographic Devices.” Journal of Endodontics 43 (9): 1517–21. 6. Chesler, Matthew B., Patricia A. Tordik, Glen M. Imamura, and Gary G. Goodell. 2013. “Intramanufacturer Diameter and Taper Variability of Rotary Instruments and Their Corresponding Gutta-Percha Cones.” Journal of Endodontia 39 (4): 538–41.
7. Gordon, M. P. J., R. M. Love, and N. P. Chandler. 2005. “An Evaluation of .06 Tapered Gutta-Percha Cones for Filling of .06 Taper Prepared Curved Root Canals.” International Endodontic Journal 38 (2): 87–96.
8. Haupt, Franziska, Miriam Seidel, Marta Rizk, Hans-Georg Sydow, Annette Wiegand, and Tina Rödig. 2018. “Diameter and Taper Variability of Single-File Instrumentation Systems and Their Corresponding Gutta-Percha Cones.” Journal of Endodontia 44 (9): 1436–41.
9. Krishna, R. Nivesh, R. Nivesh Krishna, and K. Yuvaraj Babu. 2016. “Estimation of Stature from Physiognomic Facial Length and Morphological Facial Length.” Research Journal of Pharmacy and Technology. https://doi.org/10.5958/0974-360x.2016.00423.6.
10. Marofi, Faroogh, Roza Motavalli, Vladimir A. Safonov, Lakshmi Thangavelu, Alexei Valerievich Yumashev, Markov Alexander, Navid Shomali, et al. 2021. “CAR T Cells in Solid Tumors: Challenges and Opportunities.” Stem Cell Research & Therapy 12 (1): 81.
11. Mirmohammadi, Hesam, Monika Sitarz, and Hagay Shemesh. 2018. “Intra-Manufacture Diameter Variability of Rotary Files and Their Corresponding Gutta-Percha Cones Using Laser Scan Micrometre.” Iranian Endodontic Journal 13 (2): 159–62.
12. Mohanavel, V., K. S. Ashraff Ali, S. Prasath, T. Sathish, and M. Ravichandran. 2020. “Microstructural and Tribological Characteristics of AA6351/Si3N4 Composites Manufactured by Stir Casting.” Journal of Materials Research and Technology 9 (6): 14662–72.
13. Mootha, Archana, Sankari Malaiappan, N. D. Jayakumar, Sheeja S. Varghese, and Julie Toby Thomas. 2016. “The Effect of Periodontitis on Expression of Interleukin-21: A Systematic Review.” International Journal of Inflammation 2016 (February): 3507503.
14. Nagaraja, Shruthi, and B. V. Sreenivasa Murthy. 2010. “CT Evaluation of Canal Preparation Using Rotary and Hand NI-TI Instruments: An in Vitro Study.” Journal of Conservative Dentistry: JCD 13 (1): 16–22.
15. Naseri, Mandana, Ali Kangarlou, Atefeh Khavid, and Mostafa Goodini. 2013. “Evaluation of the Quality of Four Root Canal Obturation Techniques Using Micro-Computed Tomography.” Iranian Endodontic Journal 8 (3): 89–93.
16. Nur, Bilge Gülsüm, Evren Ok, Mustafa Altunsoy, Osman Sami Ağlarci, Mehmet Çolak, and Enes
Güngör. 2014. “Evaluation of Technical Quality and Periapical Health of Root-Filled Teeth by Using Cone-Beam CT.” Journal of Applied Oral Science: Revista FOB 22 (6): 502–8.
17. Ozawa, Toshiko, Nessrin Taha, and Harold H. Messer. 2009. “A Comparison of Techniques for Obturating Oval-Shaped Root Canals.” Dental Materials Journal 28 (3): 290–94.
18. Pereira, Andréa Cardoso, Celso Kenji Nishiyama, and Lidiane de Castro Pinto. 2013. “Single-Cone Obturation Technique: A Literature Review.” RSBO 9 (4): 442–47.
19. Robert, R., C. Justin Raj, S. Krishnan, and S. Jerome Das. 2010. “Growth, Theoretical and Optical Studies on Potassium Dihydrogen Phosphate (KDP) Single Crystals by Modified Sankaranarayanan–Ramasamy (mSR) Method.” Physica. B, Condensed Matter 405 (1): 20–24.
20. Sathish, T., and S. Karthick. 2020. “Wear Behaviour Analysis on Aluminium Alloy 7050 with Reinforced SiC through Taguchi Approach.” Journal of Materials Research and Technology 9 (3): 3481–87.
21. Singla, Meenu G., Hemanshi Kumar, and Ritika Satija. 2021. “Shaping Ability of ProTaper Gold, One Curve, and Self-Adjusting File Systems in Severely Curved Canals: A Cone-Beam Computed Tomography Study.” Journal of Conservative Dentistry: JCD 24 (3): 271–77.
22. Song, D., L. Zhang, W. Zhou, and Q. Zheng. 2017. “Comparing Cone-Beam Computed Tomography with Periapical Radiography for Assessing Root Canal Obturation in Vivo Using Microsurgical Findings as Validation.” Dentomaxillofacial. https://www.birpublications.org/doi/abs/10.1259/dmfr.20160463.
23. Sriram, Nirisha, Thenmozhi, and Samrithi Yuvaraj. 2015. “Effects of Mobile Phone Radiation on Brain: A Questionnaire Based Study.” Journal of Advanced Pharmaceutical Technology & Research 8 (7): 867.
24. Subashri, A., and M. S. Thenmozhi. 2016. “Occipital Emissary Foramina in Human Adult Skull and Their Clinical Implications.” Research Journal of Pharmacy and Technology. https://doi.org/10.5958/0974-360x.2016.00135.9.
25. Suresh, P., K. Marimuthu, S. Ranganathan, and T. Rajmohan. 2014. “Optimization of Machining Parameters in Turning of Al-SiC-Gr Hybrid Metal Matrix Composites Using Grey-Fuzzy Algorithm.” Transactions of the Nonferrous Metals Society of China 24 (9): 2805–14.
26. Taşdemir, Tamer, Kürşat Er, Tahsin Yildirim, Kurtulus Buruk, Davut Celik, Sabri Cora, Erhan Tahan, Behram Tuncel, and Ahmet Serper. 2009. “Comparison of the Sealing Ability of Three Filling Techniques in Canals Shaped with Two Different Rotary Systems: A Bacterial Leakage Study.” Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontics 108 (3): e129–34.
27. Verma, Mudita, N. Meena, R. Anitha Kumari, Sudhanva Mallandur, R. Vikram, and Vishwas Gowda. 2017. “Comparison of Apical Debris Extrusion during Root Canal Preparation Using Instrumentation Techniques with Two Operating Principles: An in Vitro Study.” Journal of Conservative Dentistry: JCD 20 (2): 96–99.
28. Vigneshwaran, S., R. Sundarakannan, K. M. John, R. Deepak Joel Johnson, K. Arun Prasath, S. Ajith, V. Arumugaprabu, and M. Uthayakumar. 2020. “Recent Advancement in the Natural Fiber Polymer Composites: A Comprehensive Review.” Journal of Cleaner Production 277 (December): 124109.
29. Vyavahare, Nishant K., Srinidhi Surya Raghavendra, and Niranjan N. Desai. 2016. “Comparative Evaluation of Apically Extruded Debris with V-Taper, ProTaper Next, and the
Self-Adjusting File Systems.” Journal of Conservative Dentistry: JCD 19 (3): 235–38.
30. Yılmaz Çırakoglu, Neslihan, and Yağız Özbay. 2021. “Apically Extruded Debris Associated with ProTaper Next, ProTaper Gold and TruNatomy Systems: An in Vitro Study.” Journal of Dental Research, Dental Clinics, Dental Prospects 15 (1): 30–34.
31. Zand, Vahid, Amin Salem Milani, Pardis Tehranchi, Sabete Bagheri Sabzevar, and Omid Goudarzi. 2022. “Comparative CBCT Assessment of Obturation Quality in Different Obturation Techniques.” Journal of Dental Materials and Techniques 11 (2): 84–92.
32. Zhang, Pengfei, Keyong Yuan, Qiaoqiao Jin, Fen Zhao, and Zhengwei Huang. 2021. “Presence of Voids after Three Obturation Techniques in Band‐shaped Isthmuses: A Micro‐computed Tomography Study.” BMC Oral Health 21 (1): 227.
Article Sidebar
Published
Apr 11, 2023
Article Details
How to Cite
Swathi.S, & S.Delphine Priscilla Antony. (2023). Assessment Of the Obturation Quality of Three Different Endodontic Rotary Files Using Cbct. Journal of Population Therapeutics and Clinical Pharmacology, 30(6), 65-73. https://doi.org/10.47750/jptcp.2023.30.06.010
Issue
Section
Articles
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
All articles published in JPTCP are licensed under Copyright Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Swathi.S, & S.Delphine Priscilla Antony. (2023). Assessment Of the Obturation Quality of Three Different Endodontic Rotary Files Using Cbct. Journal of Population Therapeutics and Clinical Pharmacology, 30(6), 65-73. https://doi.org/10.47750/jptcp.2023.30.06.010